his 4-way locking cat flap is suitable for cats of all sizes and gives complete control over your cat's movements into and out of your house.
Features include:
Made from high quality tough plastic suitable for all climates. Shielded brush seal keeps out drafts, rain and insects, a transparent flap with silent action, magnetic closure keeps flap shut in strong winds, it is easily installed into panels, screens and walls.
The 4 ways that the flap can be used is: unlocked, lock in, lock out, locked.
Instructions:
For wooden doors, panels and screens: Place the template in desired position on door and draw around it completely. It is recommended that the bottom of the hole is approximately the same level as your pet's stomach. Cut out hole. This may be done by drilling a hole and then using an electric jigsaw to cut along the inside of the drawn line. Be careful to cut hole square to the door, particularly with thicker doors.For screen doors: Use scissors or a knife to cut the hole. If necessary, cut interior frame with a sharp knife to correct length to suit your door panel. Take care to keep hands clear of the blade and support inside of moulding with a suitable piece of wood. Position interior frame on inside of door and mark the 4 screw positions. For panels less than 7/8" thick: Remove interior frame and drill screw clearance holes in panel to approximately 3/16" diameter. Then, using the appropriate screws and working from the inside of the house, tighten the interior frame to the exterior frame.For panels thicker than 7/8": Do NOT drill screw clearance holes: instead first screw interior frame to inside of panel with short screws. Next drill out the 4 screw holes in the exterior frame to allow close cleanance on screw. Finally fix exterior frame to exterior of door using 3/4" screws. When happy with installation cover screw heads with caps supplied.To install in walls: After making a hole in your wall, line with 3/4" plywood (not included) or similar material. This gives a neat tunnel to the installation and readily accepts the fixing screws. After construction of tunnel, position interior frame on inside of door and mark 4 screw positions. Proceed to the above mentioned instructions for the appropriate size panel.
Size:
Overall Size: 7 5/8" x 7 7/8"
Opening: 6 1/2" 6 7/8" |
